Product Overview

Welcome to the Tom RF Silent Disco Headphones! Designed to deliver dynamic, high-fidelity wireless audio, Tom headphones are an all-in-one solution perfect for silent discos, fitness bootcamps, outdoor cinema screenings, and multi-track corporate conferences.

Equipped with Phase-Lock Loop (PLL) technology to eliminate interference and signal loss over long distances, Tom headphones feature swivel earcups that fold 90° flat for easy transport. With fast USB-C charging and 3 LED lighting modes (static, flashing, or discrete lights-off), Tom headphones bring flexibility and style to any event.

How to Set Up Your Tom Silent Disco Headphones

Setting up your Tom headphones with your radio frequency (RF) transmitters takes less than a minute. Follow these simple steps:

1. Start Your Transmitters: Set up your RF transmitters (such as the Falcon) and plug in your audio sources. Make sure each transmitter is broadcasting on a distinct channel (Channel 1, 2, or 3).
2. Power On the Headphones: Press and hold the Power button for 2 seconds until the LED indicator light turns on.
3. Select Channel: Quick-tap the Power / Channel button to toggle between available audio channels. The earcup LED lights will change color to show which channel audio feed you are receiving.
4. Adjust Volume: Push the Set / Volume dial up or down to set your preferred volume level.
5. Toggle LED Lighting: Press and hold the Set button for 3 seconds to switch light settings between static glow, flashing mode, or discrete mode (lights off).

Manual: How to Use Your Headphones

Tom headphones feature simple analog controls built directly onto the earcup for quick adjustments in dim event lighting.

Basic Controls

• Power On / Off: Press and hold the power button for 2 seconds. Hold again for 2 seconds to shut off.
• Channel Switcher: Single tap the power button to switch between channel frequencies. The LED colors will update according to the active channel selection.
• Volume Adjustment: Nudge the Set wheel up/down to adjust audio volume instantly.
• Light Mode Settings: Press and hold the Set wheel for 3 seconds to cycle between Static, Flashing, and Lights-Off mode.
• Auxiliary Audio Input / Output: The 3.5mm jack can be used to connect an audio source directly or output audio to a secondary pair of headphones for shared listening.

Charging Instructions

• Connect the provided USB-C fast-charging cable to the USB-C port on the headset.
• A full charge from empty takes less than 3 hours.
• The built-in 600mAh 3.7V Lithium-Ion battery provides up to 10 hours of continuous use with LEDs active and up to 12 hours with LEDs turned off.

Technical Specifications Summary

• Model / SKU: HR20RF / HR20RFE
• Weight: 0.25 kg (250g)
• Audio Drivers: 40mm Mylar Dynamic Drivers
• Frequency Response: 20 Hz – 20,000 Hz
• Signal-to-Noise Ratio: >80 dB | Distortion: <0.1%
• Operational Distance: >100m (up to 300m in optimum open-air conditions)
• Compliant Frequencies: EU/UK/ROW: 863–865 MHz | USA/Canada: 914–917 MHz